Your sprinkler system requires sufficient water pressure to irrigate your yard. Irrespective of adequate maintenance, your automatic sprinklers might become defective. Among the most common problems that homeowners experience with their sprinklers is low pressure on either the head or the entire system.
Below are some of the prevalent causes of low water pressure in sprinkler systems.
Backflow valves that are not fully open
Your sprinkler’s backflow preventer has one horizontal and one vertical pipe, with each having a handle that controls the valve. The handle could turn, but the valve may open halfway or not at all. When this is the case, you need the expert assistance of a professional dealing with sprinkler repair in Utah.
It’s not unusual to find a broken line being the culprit for low water pressure in your home sprinkler system. Digging near the sprinkler line, putting sharp objects in the ground and roots from shrubs are the leading causes of broken sprinkler pipes. Leaks manifest through overly wet sections or water bubbling from the ground when your sprinkler is running. Also, you should be on the lookout for sprinkler heads that have not popped up or are simply not spraying.
Dirty or clogged sprinkler heads
If water pressure is low on some sprinkler heads, it could mean that they are dirty or clogged. These heads should be examined, and the filter must be cleaned or replaced. Also, grass or any other vegetation can grow around the base of the heads, which makes it difficult for them to pop. The area around them should be trimmed and cleared.
Automatic home sprinklers are vital components that keep your vegetation hydrated. Sprinklers use both power and water pressure to irrigate your yard efficiently. Faulty components and low pressure can easily render your system ineffective.